0.4μM Gas Turbine 1510cfm F8 Air Inlet Filters

gas turbine flame retardant filter
2, the use of air filter composite fiber filter paper, filter effect, wide pleated design, uniform pleat, ventilation.
3, electroplating anti-fingerprint and spray end caps, diamond inner and outer net skeleton, not easy to rust, high penetration rate.
4, the preferred natural rubber seal ring closed neoprene seal can be customized silicone odorless food-grade materials.
5, the scope of application: air compressor air entry, oxygen station, precipitator, power generation, mining, compressor equipment, gas turbines, sand blasting, dust coal dust, dust and dust cigarette industry and other industries effectively control the degree of contamination of the working medium , Covering a wide range of industrial areas.
• Filter cartridge structure and its characteristics
• Rigid filter packs in a folded and evenly distributed arrangement to minimize the volume and maximize the filtration area effect.
• Filtration efficiency: 0.5μm or more particle size dust collection capacity of 99.9%.
• Before putting the equipment into operation, check whether the fan on the equipment is running normally, there is no abnormal noise or bad condition, otherwise it should be shut down for repair. Check the electromagnetic pulse valve is working properly, the compressed air is at 0.5 ~ 0.7MPa, or to be adjusted.
Pulse automatic cleaning adjustment. Read the manual pulse controller instructions to adjust the pulse interval, pulse width, pulse interval adjustment depending on the size of dust, the general situation can be set at about 10 seconds, the pulse width can be set at 0.1 seconds